Renders of the production design. Photos of the printed tool are coming.
PoleStamp
A paint marker for your survey pole. Set the foot on the point, push down, and you get a centred Y with a dot in the middle.
$169 CAD
Assembled, with all hardware. Paint not included.
| Mounts on | 5/8"-11 pole stud |
|---|---|
| Mark | 58 mm Y with centre dot |
| Paint | 20 oz inverted marking paint, 68 mm can (Aervoe 222 or similar) |
| Rod height offset | 0.194 m |
| Material | Black ABS, steel hardware |
How it works
- Thread it onto the stud at the bottom of your pole and drop a can into the cradle from the side.
- Look through the hole in the centre of the stencil and set the foot on your point. The spring holds up a pole and prism of about 2 kg without spraying.
- Push the pole down about 13 mm. A lever tips the nozzle and paints through the stencil.
- Lift off. The lever springs back and you move to the next point.
The mark is centred on the pole axis, so twisting the pole doesn't move it. The stencil is held by three screws and can be swapped for other shapes later. The bushing and the other printed parts can be replaced on their own if one wears out.
Reserve a PoleStamp
$169 CAD each. Shipping anywhere in Canada, or free pickup in Calgary. Reserving costs nothing. I'll email you to confirm shipping cost and timing before you pay.